Effects
> What's LIBETEX > Effects
Main effects
• the effect of removing ammonia gas: Urinary odor etc.
• the effect of removing formaldehyde: Sick house syndrome, skin diseases
• the effect of removing nonenal: Odor from the elderly, stink
• the effect of removing nitric acid gas and isovaleric acid gas: Causing bad odors such as foot odors
• the effect of removing Staphylococcus aureus: Causing skin itch such as atopic dermatitis
• the effect of removing pseudomonas aeruginosa: Skin diseases
Uses
Test data
• Tested and certified by domestic KOTITI research center / KAKEN Test Center in Japan
• Ammonia and various gas test
• Bacteria test
Domestic KOTITI research center
• Ammonia gas test
Division |
Test results |
(A) |
Initial density |
2 hours later |
Initial state(ammonia density, mg/kg) |
|
|
Blank test |
100.0 |
97.7 |
Sample ores |
100.0 |
5.2 |
Reduction rate(%) |
- |
94.7 |
• Staphylococcus aureus test
Division |
Test results |
(A) |
Staphylococcus aureus(ATCC 6538) |
Initial state |
|
Ma |
1.1 x 105 |
Mb |
6.9 x 106 |
Mc |
1.2 x 105 |
Bateriostatic reduction value |
1.7 |
Bateriostatic reduction rate(%) |
98.3 |
Tested and certified by KAKEN Test Center in Japan
• Ammonia gas test
Sample ores |
Initial density(ppm) |
2 hours later |
Gas density(ppm) |
Reduction rate(%) |
LibeTex |
100 |
0.5 |
99 |
Blank test |
100 |
73 |
- |
After being washed 10 times |
100 |
0.5 |
99 |
• Ammonia gas density
• Acid gas removing test
Sample ores |
Initial density(ppm) |
2 hours later |
Gas density(ppm) |
Reduction rate(%) |
LibeTex |
50 |
1.8 |
95 |
Blank test |
50 |
33 |
- |
• Isovaleric acid test
Sample ores |
Reduction rate(%) |
LibeTex |
90 |
• Staphylococcus aureus test
Sample ores |
Viable count |
Bateriostatic activity value |
Sterilization activity value |
Just after bacteria are injected |
After 18-hour cultivation of bacteria |
LibeTex |
4.3 |
4.3 |
3.1 |
0.4 |
General textile |
4.4 |
7.1 |
- |
- |
• Pseudomonas aeruginosa Test
Sample ores |
Viable count |
Bateriostatic activity value |
Sterilization activity value |
Just after bacteria are injected |
After 18-hour cultivation of bacteria |
LibeTex |
4.3 |
4.3 |
3.1 |
0.1 |
General textile |
4.4 |
7.5 |
- |
- |
• Formaldehyde gas removal test
Sample ores |
Formaldehyde density(ppm) |
Reduction rate(%) |
Initial density |
2 hours later |
LibeTex |
5.0 |
< 0.1 |
≥ 98 |
Blank test |
5.0 |
5.0 |
- |
• Nonenal gas removal test
Sample ores |
Reduction rate(%) |
LibeTex |
69 |